1964-1972 Canadian Oldsmobile F-85 Master Parts Catalog
 

  Back to Illustration Index

PROOFED

 

Group 9.000 Instruments & Miscellaneous - Illustration 22A

TYPICAL AIR CONDITIONING HOSE ROUTING

 

9.225 COMPRESSOR TO CONDENSER HOSE (HIGH PRESSURE)

ILLUSTRATION NO. 1P 2P 3P 4P 5P 6P 7P 8P 9P 10P 1S 10P 11P
Year Series Compressor
Fitting
O.E.H.
I.D. @
Splicer Hose
I.D.
U-Joint
Fitting
O.E.H.
I.D. @
Muffler
Fitting
Muffler Muffler
Fitting
O.E.H. P.O.A.
Fitting
Hose
I.D.
Condenser
Fitting
64-65 F85 3023715 13/32 - 25" 3023687 13/32 6" - - 3023675 589034 3023675 - - 13/32 - 20" 3023683
66 V6 3023715 13/32 - 15" - - *13/32- 10" 13/32 - 40" 3023658 589034 3023675 - - 13/32 - 20" 3023683
66 F85 3023715 13/32 - 25" 3023687 13/32 6" -   3023675 391211 - - - - -
67-70 F85 3023715 13/32 - 17" -   - - - 3023720 - 13/32 - 11" - - 3023658
71-72 F-85
Type 1
3023715 13/32 - 16" - - -   - 3023720 - 13/32 - 11" - - 3023658
F-85
Type 2
- - - - - - - 231297 - 13/32 - 17" - - 3023658
O.E.H. - Original Equipment Hose
Note - When replacing O.E.H., eliminate splicer 3P and use one piece hose.
* When replacing U-Joint with hose also order two splicers (3023687)

 

9.231 RECEIVER TO EXPANSION VALVE HOSE (LIQUID)

ILLUSTRATION NO. 1L 2L 3L 4L 5L 6L 7L
Year Series Receiver
Fitting
Hose I.D. @ Splicer O.E.H.
I.D. @
Splicer Hose

I.D. @

Expansion
Valve
Fitting
64-65 F85 3023691 5/16 — 9" 3023686 5/16 — 11" 3023686 5/16 — 11" 3023674
66 L6 3023691 - - 5/16 — 23" - - 3023674
66 F85 V8 3024791 5/16 — 18" 3023686 5/16 — 23" - - 3023674
67 L6 3023699 - - 5/16 — 23" - - 3023674
67 F85 V8 3024791 5/16 — 18" 3023686 5/16 — 23" - - 3023674
68-70 F85 3024791 5/16 — 16" 3023686 5/16 — 26" 3023686 5/16 — 4" 3023697
71-72 F85 3024791 5/16 — 17" 3023686 5/16 — 26" 3023686 5/16 — 4" 3023697
@ = hose length
O.E.H. - Original Equipment Hose
When replacing O.E.H., eliminate splicer and use one piece

 

9.238 EVAPORATOR TO COMPRESSOR HOSE (SUCTION)

ILLUSTRATION NO. 1S 2S 3S 4S 5S 6S 7S 8S 9S
Year Series Evaporator
Fitting
Hose
I.D. @
Splicer O.E.H.
I.D. @
U Joint
Fitting
Hose
I.D.
Muffler O.E.H.
I.D. @
Splicer Hose Compressor
Fitting
65 V6 (*1) 3025833 5/8 - 34" 3023689 5/8 - 17" - - - - - - 3023717
65 V6 (*2) 3023660 5/8 - 38" 3023689 5/8 - 18" - - - - - - 3023717
65 F85 V8 (*2) 3023660 5/8 - 4" 3023689 5/8 - 21" 3023719 - - 5/8 - 15" - - 3023717
65 F85 V8 (*3) 3023654 - - 5/8 - 17" - - - - - - -
66-67 F85 3023660 5/8 - 4" 3023689 5/8 - 34" - - - - - - 3023717
68-70 F85 3023722 - - 5/8 - 38" - - - - - - 3023717
71-72 F85 3023722 - - 5/8 - 38" - - - - - - *3023717
O.E.H. - Original Equipment Hose
*
If necessary, use 1/8" shim (prefer wheel alignment shim) on opposite side (discharge fitting) for proper alignment and torque of hose retention plate to insure a positive seal of "0" rings.
     *1 - 1965 1st Type use with suction throttle valve 5910492 of 5910545
     *2 - 1965 2nd Type - use with suction throttle valve 5910508
     *3 - 1965 1st Type use with suction throttle valve 5910530 or 5910544
** Must also cutoff discharge hose fittings. Part # 3023721 block is for both discharge end suction hose.
   

HOME      SEARCH      ILLUSTRATIONS INDEX      TEXT INDEX      MODEL INFO     OTHER      ABOUT

 

Questions? Comments? Send an e-mail.
© 2010-2011 OLDSmobility.com. All rights reserved. No part of this website may be reproduced or redistributed without explicit permission. (In other words...don't steal my work!)